Trouble turning on your iPhone? We explain the possible causes and solutions — 2022

The advantages of technology are practically countless today and we barely perceive them due to how well accustomed we are to living with it. However, if we are aware of its disadvantages from time to time it leaves us 'thrown'. An example of this is an iPhone that won't turn on, which can be very scary. That is why in this post we invite you to remain calm and learn what the possible causes are and how you can solve it.

Causes of an iPhone not turning on

There are already many iPhones that have hit the market since 2007, but regardless of the model you have and even the most recent iPhone 11, you may encounter the problem of not being able to turn on your device. Obviously it is understood that if you have arrived here it is because your device is turned off and does not react to pressing the corresponding power button.

iPhone won't turn on

First of all, if you have a iPhone 6s o iPhone 6s Plus you should know that these fall into a free apple repair program by which they solve the problem. This is because some terminals manufactured between October 2018 and August 2019 have arrived with a factory problem that causes them to have more problems than normal when turning on.

One of the causes of your iPhone not reacting when you try to turn it on is because the button has stopped working . It is not that this is something usual, but in the end everything ends up wearing out and these buttons are not free either, although we insist on emphasizing that it is not usual. If your iPhone is new or has not been used for long, it is likely that the button or some part of the internal circuitry that connects it is defective.

The liquid damage they are the most possible cause and that almost with total probability can have your iPhone for not turning on. The worst enemy of an electronic device is water or any other liquid element, and even though a device has IP68 certification, the sealing may not be entirely correct and some liquid may have leaked. Also exposing the device in humid situations can cause this.

Also a accidental fall or blow to the device could be a more than obvious cause for the device not to work normally, in this case for it not to turn on. There are occasions in which, after a blow, some internal component of the equipment has been defective and yet it will be able to work for a certain time until it shows the final failure.

Once we have seen the possible hardware problems, we have to focus on the software. This is not a common reason for an iPhone not turning on either, but there is always even the slightest possibility that it is a problem with the operating system the one that is preventing the correct power on of the terminal.

How to fix the problem

Reading the above information makes you aware of possible causes, but unfortunately you will not be able to tell at a glance if your iPhone has any of those problems. However, all is not lost and you can try severalsolutions when iPhone won't turn on.

DFU mode on iPhone 6

The first thing to try is hard reset iPhone . To do this, you must connect the iPhone to your computer by cable, regardless of whether it is Windows or Mac. Once this is done, start iTunes and check if the program has detected the iPhone and if it has been turned on. If so, the chances that it is a button failure increase, however, and to rule out that it is not a software problem, you should tryrestore device from iTunesto see if it works that way.

If iTunes has not recognized the iPhone and it has not been turned on, you will have to try a combination of buttons that varies depending on the model of the device:

  • For the iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro and 11 Pro Max: You must quickly press and release the volume up button, the volume down button and finally press and hold the side power button until an image appears on the screen that says connect to iTunes.
  • For the iPhone 7 and 7 Plus: You must hold the volume up and volume down buttons at the same time until an image appears on the screen that says connect to iTunes.
  • For the iPhone 6s, 6s Plus y anteriores: You must press the start button and the power button at the same time until an image appears on the screen that says connect to iTunes.

If the device still does not turn on or show any signal despite having carried out the previous instructions, all you have to do is go to repair it. You can visit the apple support website and try to make an appointment at an Apple Store or Authorized Technical Service (SAT). You also have a chat where they will assist you at a certain time, as well as a free phone if you call from Spain, which is the +34900150503 .

However, and as a final alternative if you can't get iTunes to recognize it, we recommend you take a look at applications like Tenorshare ReiBoot . This is a program available on macOS and Windows that allows, among other things, to restart an iPhone or iPad that, due to some software problem, cannot boot.

reiboot iphone mac How much will the repair cost you? Well, it depends on several factors. If the iPhone is under warranty and the problem is not due to damage or moisture, you may not have to pay anything to fix it. If the device is no longer under warranty, it is very likely that you will have to bear the cost of the repair, regardless of the causes. Nor can an exact price be stated, since depending on the problem that causes it, it may vary.

Have you been able to fix the problem? Have you found any other solution? You can tell us in the comment box.